Before you plug in a space heater or put up the holiday lights, check your cords and outlets. If something looks damaged or has been giving you trouble, deal with it before you use it again.
You can start with what you can see and how you use your appliances. Leave the wiring and electrical panel to a qualified electrician.
1. Give your space heater a safe place to work
Place a portable heater on a solid, flat surface, at least three feet from curtains, bedding, furniture and anything else that can burn. Inspect its cord and plug before use. If either is damaged, do not use the heater.[1]
Plug the heater directly into a wall outlet, never into an extension cord or power strip. A surge protector is not an exception to that rule. If the cord cannot reach a suitable outlet, choose a different location rather than adding an extension.[1]
Follow the heater manufacturer’s instructions. If using the heater reveals a warm or discolored outlet, flickering lights or recurring breaker trips, stop using the affected setup and arrange an electrical evaluation.[2]
2. Treat electrical warning signs as a reason to stop
Have you been putting up with any of these problems?
- Circuit breakers that trip repeatedly.
- Outlets that feel warm or show discoloration.
- Lights that flicker or dim.
- Sparks from an outlet.
- A burning or rubbery smell from an appliance.
- A tingling feeling when touching an appliance.
The National Fire Protection Association identifies these as reasons to contact a qualified electrician or your landlord.[2] They are warning signs, not enough information to diagnose the problem yourself.
Do not remove outlet covers, work inside the panel or keep resetting a breaker to force equipment to run. Leave electrical repairs to a qualified electrician. If there is smoke or fire, leave the building and call 911 from outside. A service appointment is not a substitute for an emergency response.
3. Look at what is sharing each outlet
Before holiday hosting or a change in your daily routine, check where your appliances that produce heat are plugged in. NFPA recommends using only one appliance that produces heat per receptacle outlet at a time. That includes toasters, coffee makers and space heaters. Major appliances should plug directly into a wall receptacle, not an extension cord or plug strip.[2]
That does not mean separate outlets necessarily have separate circuits. If ordinary use repeatedly trips a breaker, an electrician needs to assess the situation rather than simply moving plugs around.
Extension cords are for temporary use. Keep cords out from under carpets and away from doorways where they can be damaged. If an extension cord has become a permanent part of a room, ask about a more suitable outlet arrangement.[2]
4. Make a generator plan before an outage
If a portable generator is part of your outage plan, decide on a safe outdoor operating location before you need it. CDC says to keep a generator outside, at least 20 feet from doors, windows and vents.[3]
Do not operate it inside a home, garage or other enclosed space. Opening a door does not turn an indoor location into a safe outdoor one. Have a working carbon monoxide detector as part of your safety plan, and follow the generator manufacturer’s operating instructions.[4]
For any proposed connection to your home’s electrical system, speak with a qualified electrician before use. Do not improvise a connection through a wall outlet.
5. Make your service call more useful
If you notice a concern, write down what happened without trying to recreate it:
- Which room, outlet or appliance was involved?
- What was running at the time?
- Was there a smell, discoloration, flickering or a breaker trip?
- Has it happened once or repeatedly?
Tell the electrician what you noticed. You do not need to find the faulty part or try to fix it before calling.
Take care of problems before you need that outlet again
If an outlet has been acting up or a breaker keeps tripping, do not keep using the same setup and hope it holds. Have a qualified electrician check it before you rely on it this winter.
For electrical questions or service in Fargo and Moorhead, contact JDP Electric at
(701) 232 1991 or info@jdpelectric.net to discuss your concerns and availability.[5]
Talk with JDP Electric about your electrical questions and service availability.
Call (701) 232 1991 ↗